dc/dc converte r pv(r) series 201 4 .02.12-a/1 page 1 of 4 mornsun guangzhou science & technology co., ltd. reserves the copyright and right of final interpretation new energy isolation converter with ultra wide input voltage of 200-1200vdc rohs features z input v oltage up t o 1200v z 6:1 ultra-wide input v oltage range: 200 ~ 1200vdc z industrial grade operating t emperature: -25 ~70 z 4 000vdc high isolation v oltage z high efficiency, low ripple& noise z under input voltage protection (automatic recovery) z over output v oltage protection(automatic recovery) z short circuit protection(automatic recovery) z input against reverse protection z high reliability, long life, three years warranty pv (r)series----- are regulated dc-dc converters with features of 200-1200vdc ultra-high voltage input, high efficiency and high reliability. they can be widely used in photovoltaic power generation, high-voltage inverter and so on, which provide stable operating voltage to the equipment and improve the power and the load's safety performance with multiple protection when working under abnormal conditions. selection guide model output power nominal output voltage and current(vo/io) efficiency (%,typ.) max. capacitive load( f) PV05-27B05R 5w 5v/1a 73 10000 pv10-27b05r 10w 5v/2a 75 6000 pv10-27b24r 24v/0.42a 82 1500 input specifications item operating conditions min. typ. max. unit input voltage range 200 -- 1200 vdc input current pv05 200vdc -- -- 36 ma 600vdc -- -- 13 1200vdc -- -- 8 pv10 200vdc -- -- 69 600vdc -- -- 24 1200vdc -- -- 14 inrush current 200vdc -- 4-- 600vdc -- 12 -- 1200vdc -- 25 -- input under-voltage protection* under voltage protection range 175 -- 185 v under voltage release range 185 -- 195 external input fuse 1a , slow fusing output specifications item operating conditions min. typ. max. unit output voltage accuracy -- 1 2 % linear regulation -- 0.5 1 load regulation -- 0.5 1 output ripple & noise* 20mhz bandwidth (peak-peak value) -- 80 150 mv temperature drift coefficient -- -- 0.02 %/ c short circuit protection continuous, self-recovery over-current protection 110%io self-recovery
dc/dc converte r pv(r) series 201 4 .02.12-a/1 page 2 of 4 mornsun guangzhou science & technology co., ltd. reserves the copyright and right of final interpretation over-voltage protection PV05-27B05R (feedback-clamp) voltage limited < 7.5v pv10-27b05r (feedback-clamp) voltage limited < 7.5v pv10-27b24r (feedback-clamp) voltage limited < 29v delay time -- -- 500 ms note: *parallel line t est method is adopted t o t est t he ripple and noise, please see d c-d c produc t applicatio n note s f or s pecific operation methods. general specifications item operating conditions min. typ. max. unit isolation voltage input-output test time: 1min 4000 -- -- vac operating temperature -25 -- +70 c storage temperature -25 -- +105 storage humidity -- -- 95 %rh w elding temperature wave-soldering 2605 ; time:5~10s manual-welding 36010 ; time:3~5s switching frequency -- 65 -- khz hot plug unavailable mtbf mil-hdbk-217f@25 c>300,000h physical specifications casing material aluminum package dimensions 74.00*52.00*28.00mm weight 195g(typ.) cooling method free air convection emc specifications emi conducted disturbance cispr22/en55022, class a (see fig. 2 for recommended circuit) radiated emission cispr22/en55022, class a (see fig. 2 for recommended circuit) ems electrostatic discharge iec/en61000-4-2 6kv/8kv perf. criteria b radiation immunity iec/en61000-4-3 10v/m perf. criteria a eft iec/en61000-4-4 4kv (see fig. 2 for recommended circuit) perf. criteria b surge immunity iec/en61000-4-5 2kv (see fig. 2 for recommended circuit) perf. criteria b conducted disturbance iec/en61000-4-6 10 vr.m.s perf. criteria a immunity for power iec/en61000-4-8 10a/m perf. criteria a immunities of voltage dip, drop and short interruption iec/en61000-4-11 0%-70% perf. criteria b product characteristic curve 50 100 0 70 -25 input:600v~1200v input:200v~600v 75 60 50 100 0 70 -25 75 1000 400 1200 20 40 100 60 80 200 600 pv10-27b05r : pv10-27b24r, PV05-27B05R : input voltage( ) vdc ambient temperature:25 input voltage derating graph output power percent(%) output power percent(%) input voltage: 200~1200vdc temperature derating graph output power percent(%) ambient temperature( ) temperature derating graph ambient temperature( ) input voltage: 200~1200vdc input:600v~1200v input:200v~600v
dc/dc converte r pv(r) series 201 4 .02.12-a/1 page 3 of 4 mornsun guangzhou science & technology co., ltd. reserves the copyright and right of final interpretation pv10-27b05r pv10-27b24r PV05-27B05R 50 55 60 65 70 75 80 85 90 200 400 600 800 1000 1200 efficiency(%) input voltage(vdc) efficiency vs input voltage (full load) pv10-27b05r pv10-27b24r PV05-27B05R 40 45 50 55 60 65 70 75 80 85 90 10 20 30 40 50 60 70 80 90 100 efficiency(%) output power percentage(%) efficiency vs output load(vin=600vdc) design reference 1. t ypical application circuit +input -input fus e c5 c6 tvs rl +vin -vin +vo -vo mov acdc fig. 1: typical application circuit model c5( f) c6( f) tvs tube PV05-27B05R 1 220 smbj7.0a pv10-27b05r pv10-27b24r 120 smbj30a note: output filtering capacitor c6 is electrolytic capacitor, it is recommended to apply electrolytic capacitor with high frequency and low resistance. for capacitance and current of capacitor please refer to manufacture?s datasheet. capacitance withstand voltage derating should be 80% or above. c5 is ceramic capacitor, w hich is used t o filter high-frequency noise. tvs is a recommended component t o protect post-circuits i f converte r fails. 2. emc solution-recommended circuit mov ntc fuse c5 c6 tvs rl +vin -vin +vo -vo + + + + +input -input r1 r2 r3 r4 c1 c2 c3 c4 ac dc fig 2: emc application circuit with higher requirements fig 3: recommended emc circuit-pcb layout suggestions for safety regulation and wiring width: wire width 3mm, distance between wires 6mm, and distance between wire and ground 6mm element model recommended value mov s20k1000 c1, c2, c3, c4 47 f/450v r1, r2, r3, r4 1m ? /2w ntc 5d-9 fuse 1a/250v, slow fusing, necessary 3. for more information please find the application note on www.mornsun-power.com
dc/dc converte r pv(r) series 201 4 .02.12-a/1 page 4 of 4 mornsun guangzhou science & technology co., ltd. reserves the copyright and right of final interpretation dimensions and recommended layout note: 1. packing information please refer to 'product packing information'. packing bag number: 58220010; 2. unless otherwise specified, data in this datasheet should be tested under the conditions of ta=25 c, humidity<75% when inputting nominal voltage and outputting rated load; 3. all index testing methods in this datasheet are based on our company?s corporate standards; 4. the performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products will exceed the above-mentioned requirements, and please directly contact our technician for specific information; 5. we can provide product customization service; 6. specifications of this product are subject to changes without prior notice. mornsun guangzhou science & technology co., ltd. address: no. 5, kehui st. 1, kehui development center, science ave., guangzhou science city, luogang district, guangzhou, p. r. china tel: 86-20-38601850-8801 fax: 86-20-38601272 e-mail: info@mornsun.cn
|
